◆Working Principle:

CDMP series long bag spraying and blowing large non-bag dust collector is operated by negative pressure, external filtering filtration form, the filter bag is fixed on the upper flower plate of dust collector through sealing elastic bag mouth, and the bag cage is installed inside the filter bag to support the filter bag. During normal operation, the airflow cut-off valve is in the open state, dusty gas enters the filtering chamber under negative pressure and wears the filtering bag, and enters the inside of the filtering bag after filtration, the clean gas enters the clean gas chamber through the outlet of the filtering bag, and the gas is discharged out of the machine through the airflow cut-off valve into the outgassing flue; the dust is retained on the outside surface of the filtering bag, and the surface of the filtering bag is partially deflated due to the supporting effect of the bag cage, and the dust on the outside surface of the filtering bag is retained on the outside surface of the bag for a long time. With the prolongation of filtration time, the thickness of dust on the outer surface of the filter bag increases, and the pressure difference between inside and outside of the filter bag increases gradually. When the pressure difference and the thickness of dust reaches a certain value, the pulse valve on the air bag will spray the compressed gas into the filter bag through the blowing pipe in sequence, and the filter bag will be transformed from deflated state to the deformed state of outer drum instantaneously, so that the dust on the surface of the filter bag will be cleared and fall into the dust hopper, and then the dust will be discharged out of the machine through the dust discharge device.

◆Performance characteristics:

1、Adopting pulse branch blowing dust cleaning technology, strong dust cleaning ability, high dust removal efficiency, low emission concentration, small air leakage rate, less energy consumption, less steel consumption, less floor space, stable and reliable operation, good economic benefits. It is suitable for flue gas dedusting in metallurgy, building materials, machinery, chemical industry, electric power and light industry.
2, the box adopts airtight design, good sealing, check the door with excellent sealing materials, paraffin leakage detection in the production process, the leakage rate is very low.
3、Inlet and outlet ducts are compactly arranged, with low airflow resistance.
4, the use of sub-compartmental air pulse blowing cleaning, cleaning cycle is long, low consumption, can be doubled to improve the life of the filter bag and the valve piece.
5、It is possible to change the bag without stopping the machine, and the maintenance will not affect the normal operation of the equipment.